Kidde C3010d Worryfree Carbon Monoxide Alarm With Digital Display Review

Description

The Kidde C3010D is a 10-year, sealed battery, carbon monoxide alarm which includes a digital brandish characteristic and uses electro-chemical sensing technology to protect you and your family from the dangers of carbon monoxide. The C3010D alarm will automatically activate when it is attached to the mounting bracket. At the cease of alarm life, the unit will chirp, indicating the alert is in need of replacement. A screwdriver can be used to deactivate the unit, stopping the end-of-life chirp and making information technology safe for disposal. The inside embrace of the mounting subclass features a quick reference guide for what to do in case of an alarm. This easy-to-install alarm is suitable for all living areas and has a x year life and limited warranty.

Consumer Benefits

The Kidde C3010D provides yous and your family with a loud warning point in response to elevated levels of carbon monoxide in your abode. The unit contains a x-yr tamper proof battery that eliminates the need for battery replacement, and provides continuous monitoring of CO levels, even during power outages. The digital display feature allows for piece of cake viewing of carbon monoxide levels from 30-999 PPM (parts per million). The C3010D will too detect and store concentration levels every bit low as 11 and upwardly to 999 PPM with its superlative level memory display. The 10 year limited warranty lasts the life of the alarm.

Office Number (Ordering Number): 21010047

• Sealed-in Lithium Battery – Sealed-in lithium power supply; no battery replacement required over the 10 year life of the alert. Eliminates worry nearly battery removal or unauthorized deactivation of alarm.

• Digital Display – Shows CO level in PPM (parts per million). Updates digital reading every 15 seconds allowing you to see if levels change.

• Peak Level Memory – Displays the highest CO concentration measured since the concluding reset.

• Self Activation – Alarm automatically activates when attached to the mounting bracket.

• Test/Reset Push – Tests the unit of measurement for proper operation. Resets the Carbon Monoxide Alarm

• Greenish LED – Flashes every 30 seconds to point the unit is operating properly.

• Reddish LED – When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alert pattern will sound. The carbon monoxide alarm pattern is 4 short beeps, followed by 5 seconds of silence, followed by 4 short beeps with a corresponding reddish LED flash. This wheel volition continue for 4 minutes and then modify to 2 patterns once a minute there after.

• Amber LED – Flashes every second to indicate the unit of measurement is in fault mode. Ane quick beep every thirty seconds alerts the unit is in error condition. One quick beep every sixty seconds is an indication of depression bombardment ability.

Technical Specifications

Model:	C3010D
Power Source:	Sealed Lithium Bombardment
Sensor:	Electrochemical
Audio Alert:	85dB at 10ft
Temperature Range:	xl˚F (iv.4˚C) to 100˚F (37.8˚C)
Humidity Range:	10%-95% relative humidity (RH)
Size:	4.5"50 x ii.75"H 10 1.5" D
Weight:	.31lb
Wiring:	No
Interconnects:	No
Warranty:	x year express

Architectural and Engineering Specifications

The carbon monoxide alarm shall be Kidde Model C3010D or approved equal. It shall be powered by a sealed lithium bombardment. The temperature operating range shall be between 40ºF and 100ºF (4ºC and 38ºC) and the humidity operating range shall be ten% - 95% not condensing relative humidity. The CO sensor shall be of a fuel prison cell design and shall meet the sensitivity requirements of Underwriters Laboratories UL2034 Unmarried and Multiple Station Carbon Monoxide Alarms. The alarm can be installed on the surface of any wall or placed on a tabletop following the UL/NFPA/Manufacturer's recommended placement guidelines. The unit of measurement shall incorporate a digital display that meets the sensitivity requirements of UL 2034. The brandish will identify the levels of CO in parts per 1000000 (PPM) once that level reaches 30 PPM (i.east.: "abnormal" levels). The alarm shall include a test button that volition electronically simulate the presence of CO and cause the unit of measurement to go into alarm. This sequence tests the unit of measurement's electronics to ensure proper operation. Per UL 2034 requirements, the CO sensor will not alert to levels of CO below thirty ppm and volition alarm in the post-obit time range when exposed to the respective levels of CO. 70 ppm CO Concentration 60 – 240 minutes 150 ppm CO Concentration x – l minutes 400 ppm CO Concentration 4 – 15 minutes The unit shall incorporate iii LEDs. A green LED will flash in one case every xxx seconds to indicate the alarm is operating properly when power is present. A red LED will pulse to indicate carbon monoxide has been detected until the device is reset or CO is eliminated. An amber LED will flash every 2d to signal alarm malfunction or depression battery. The alarm shall include a piezoelectric horn that is rated at 85 decibels at 10 feet. When the unit detects carbon monoxide, the alert pattern volition be 4 (iv) brusque beeps – followed by v (5) seconds of silence – followed by four (4) curt beeps with a corresponding ruby LED flash. It shall include a 10-year manufacturer's limited warranty.

lansfordbity1954.blogspot.com

Source: https://www.kidde.com/home-safety/en/us/products/fire-safety/co-alarms/c3010d/

Share this post